Watermakers / Options & Upgrades / Engine Mount Brackets
Engine mount brackets and tensioners
Heavy-duty, CNC-machined brackets for mounting an engine-drive high-pressure pump.
Engine Mount Brackets
Mounting the pump, made straightforward.
Mounting the high-pressure pump as a power take-off on your engine or generator is the biggest variable in an engine-drive install. These CNC-machined brackets make it straightforward, whether you do it yourself or use a yard.
Sliding base plate (horizontal adjustment)
Takes the guesswork out of lining up the pump with your engine's pulleys.
- Material. CNC cut from heavy-duty 8mm aluminium, mild steel or stainless steel.
- Travel. Over 50mm of flat sliding adjustment to set the tension on the single "A" section belt.
- Best for. Bottom-mount positions, or mounting flat on the engine-bed stringers.
Pivot bracket (vertical adjustment)
When the pump has to sit above or below the engine, a pivoting bracket is often the best choice.
- Tensioning. Works like an alternator bracket, pivoting vertically to adjust belt tension.
- Material. CNC cut from 8mm mild steel or stainless steel, then TIG welded.
- Supplied with. A stainless steel pivot pin and tensioning bolt.
- Drain access. The large holes in the bracket leave room for the engine's water and oil drains.
More Options
Other ways to tailor your system.
Output
Performance and output upgrades
Membrane expansion kits, Autoflush, and coarse 20-micron pre-filters.
See more → SparesOffshore spares and maintenance
A complete spares kit for long passages away from port.
See more → HardwarePanels, valves and hardware
Control panel stand-offs and a multi-tank selector valve.
See more →Want to add something to your system?
Tell us which system you have and what you'd like to add. We'll confirm what fits and send a quote.