Support / Technical Tips
Technical tips
Step-by-step guides for maintaining and troubleshooting your system.
Guides
Maintenance and troubleshooting.
We add new guides over time.
Output
How to measure your output
Test your system's real flow rate with a measuring cup and your phone.
Read guide → StoragePickling your system
Protect the membranes when the system will be left for more than 7 days.
Read guide → PressureResetting your pressure relief valve
Reset the PRV if pressure drops to around 200 psi while you bring the system up.
Read guide → TroubleshootingPressure problems
Diagnose a loss of pressure, fluctuating gauges or low product flow.
Read guide → MaintenanceReplacing the membrane element
Remove, replace and commission a new membrane element.
Read guide → InstallationInstalling the boost pump
Mounting, orientation and wiring for the boost pump.
Read guide → UpgradeAdding a second or third membrane
Take your system from 80 to 160 or 240 litres per hour.
Read guide →Questions
Choosing and comparing.
Compare
Engine drive, AC or DC?
Our three marine systems side by side.
Read more → SizingHow much water do you need?
Output per day, and when to add a membrane.
Read more → PowerDo our watermakers use more power?
The trade-off we chose, in plain terms.
Read more → OverseasBuying and installing overseas
Quotes, tax, installation, and becoming a dealer.
Read more →Can't find what you need?
Ask us. If it's a question other owners are likely to have, we'll write it up here too.